Single sided edge banding machine

Single sided edge banding machine

Brand OTT
Type XM 2510 F
Year 2006
stock number 0030722
state Gebraucht
Price (plus VAT.) -

your contact person

Ralf Teubner
Vertrieb Deutschland & Export
+49 (0)5263 41159
+49 (0)160 7057632
write e-mail
Klaus Beckmann
Vertrieb Deutschland & Export
+49 (0) 5263 41117
+49 (0) 151 12797947
write e-mail

Technische Daten

Single sided edge banding machine
Brand: OTT
Type: XM 2510 F
Year: 2006
 Right hand machine


For banding and processing :

Veneer, plastic and massive edges.

Edge thickness: 0,2 - 25 mm


Technical data:

 Workpiece dimensions:

Width min.: 70 mm

Height min.: 8 mm

Height max.: 60 mm

Lenght min.: 150 mm

Feed speed: 10- 20 m/min - stepless

Working height: 880 mm

Compressed air supply: 6 bar 1 / 4 "


Machine dimensions:

Machine height: 1.500 mm

Machine width: 1.250 mm

Machine length: 9.850 mm

Machine weight: approx. 5.200 kg


Machine equipped with:

- Double roller top pressure with electronical positioning

- Pneumat. control of all units from the central touch screen operation via Beckhoff industry PC


- CM - CombiMelt - gluing system:

Suitable for the process of EVA and PUR hot melt as well as all usual cleaning granulates. Several kind of glues with several working parameters (like dosing volume, pre-melting and working temperatures) are processable via individual working programs.

Basic equipment: Tank 2,5 l with filling pipe


Control system

- Operation/control via a 15 inch coloured-touch-monitor, unlimited number of working programs alphanumeric memorizable, with several preselections for the processing units as well as working parameters for Combi-melt - gluing system for full automatization and max. operation comfort. Single frequency inverter for the individual switch of single processing motors.

- Hole recognition for blank out of CNC processings, cuts and similar steps (up to a route of 80mm)

- Network-compatible


Processing Units
 Premilling
for process of chip board with 2 HF motors 2 x 3,0 kW, 12000 n, in working- and counter-working direction, distance controlled


Edge Magazine for the automatical supply of strip edges with spiked rollers feed and pneumat. pressure beams. Inclusive optical edge monitoring

Automatical coil magazine

Automatical stop of coil feed


End trimming unit with 2 HF motors 250 Hz, 14000 n, motors and saw blades pneumatical swivable via selector switch at operation panel or via program integration


Flush milling unit with 2 HF motors á 1,9 KW, 12000 n, 200 Hz, for edge thickness up to 25 mm.


Milling unit for fine or chamfer milling of massive edges, plastic and veneer edges, chamfer depth adjustment via program control 0-3 mm stepless. Cleaning spindle function for rough milled massive wood edges with fine correction via operation panel with 2 HF-motors 0,75 kW, 250 Hz, 14000n, 0 - 45 ° swivable, tracing on 2-sides.


Millling unit for upper and lower lengthwise milling of radii on plastic, PVC and wood edges. With tracing on 2 sides and pneumatical postitioning via the control programm. With 2 HF-motors 0,4 kW 250 Hz/14000 n, with fix tilt of working spindles - 25° -.


Scraping unit

 Contour trimming
with two separate working spindles for top or bottom. For the radius processing of frontal and rear fronts or postforming process. Milling heads equipped with two automatical adjustable axes for depth and front adjustment as well with automatical edge thickness adjustment. Detailed adjustments in processing programs memorizable.


Flat scraping unit with fine tracing device for hot melt rests remove in the area of joint with suction.


RS cleaning set with 4 -fold spraying devices and fine buffing units for cleaning the surface

- AS - antistatic spraying device 2 fold, on glued joint


Universal milling unit

for grooving, rebating, profiling, with 1 HF-motor 3,5 kW, 150 Hz, 8500 n, 30 mm spindle diameter 0 - 90° swivable, either in working or counter working direction. Use control for fronts or sides via operator guidance - without tools.


Universal milling unit

for grooving, rebating, profiling, with 1 HF-motor 3,5 kW, 150 Hz, 8500 n, 30 mm spindle diameter 0 - 90° swivable, either in working or counter working direction. Use control for fronts or sides via operator guidance - without tools.


Automat. lubrification

Heated infeed fence

2-fold-magazine, automatical coil supply stop, for feed of each one edge coil with 800 and 400 mm diameter. With automatical change of coils via the operation panel.


Specials:

The gluing height will be risen on a max. panel thickness of 65 mm. The standard process in the area of end trimming lengthwise process - milling and both scraping units are considered. On 65 mm thick panel materials max. 1 mm pvc edges should be processed. Therefore a hold-down, back-moving device and cutting system is changed.


Automatical contour trimming and rough milling unit can only process a panel thickness of 60 mm



Note:

The specifications and descriptions are a copy of the order confirmation at that time. Datas are for information and are not binding.