Edge and profile grinding machine

Edge and profile grinding machine

Фабрикат Heesemann
Тип UKP 22
Год выпуска 1989
Инвентарный номер 0030926
Состояние Gebraucht
Цена плюс НДС € 15000.00

Ваше контактное лицо

Eugen Pries
Vertrieb Export & Osteuropa
+49 (0)5263 41144
+49 (0)171 6287083
Написать письмо

Technische Daten

Edge and profile grinding machine
Brand: Heesemann
Type: UKP 22
Year: 1989


1 workpiece transport system
Overall length 8,860 mm
Double chain for workpiece transport
Infinitely variable feed speed 5-30 m / min.
Working height 880 mm
adjustable fence with digital display
Double transport system with manually adjustable and centrally height-adjustable roller pressure bar
Support rollers can be pulled out laterally to widen the support by approx. 500 mm
Operating voltage 380 V.

4 universal tripods
to accommodate "M 4", "M 4-L" and "EGS" units
Manual adjustment with digital display
swiveling 90 degrees up, 45 degrees down

2 belt sanding units "M 4"
for grinding profile sections and straight edges
Sanding belt speed 0.5 - 12 m / s, continuously adjustable
Belt length 2,300 mm
Belt emitting device
Tape break switch
Tool holder with quick-change device
Base plate for grinding tools
working in the same and opposite directions
Body length 630 mm
130 mm wide
Motor power 3 kW

1 belt grinding unit "M4-L"
for grinding profile sections and straight edges
Sanding belt speed 0.5 - 12 m / s, continuously adjustable
Band length 2,800 mm
Belt emitting device
Tape break switch
Tool holder with quick-change device
Base plate for grinding tools
working in the same and opposite directions
Body length 965 mm
80 mm wide
Motor power 3 kW

2 oscillation devices
for full use of the sanding belt
for M4 sanding belt units

1 grinding wheel unit "EGS"
for special smoothing work on wood and lacquer sanding
with electronically controlled, load-dependent adjustment of the grinding wheel
set up for automatic starting and lifting powered by a 1.5 kW motor
working in the same and opposite directions
Disc diameter 200 mm
Drive power 1.5 kW
without grinding wheel, body length 350 mm

1 device for edge breaking "vibration system"
for soft rounding and edge breaking when using hot melt adhesive
consisting of an upper and lower grinding unit
20 mm wide, max. 50 m long, body length 800 mm

1 pulse pause control

2 brush units
1 x on the side and 1 x from above
Diameter 150 mm, body length 400 mm
100 mm wide, motor power 0.74 kW

1 counter ruler with central adjustment

30 pinch rollers
with an extended spring steel bolt in the roller pressure beam

6 lateral guide rollers
for attachment between the sanding units for the scissors transport of strips

36 drivers


Note:
The technical data and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding.